Menu
Menu
Complete control and automation are possible for much less than you might expect.
Reign’s Oil & Gas Solutions offers real-time access to all your sites. The Reign solutions eliminate the need to frequently visit remote areas to visually check the status of the equipment, saving critical resource time and money and expensive truck rolls. The patent pending remote monitoring solutions provide essential data for making better decisions, such as when to send resources to the site for filling and emptying tanks and notify you of critical events to help eliminate spills or equipment outages.
Adding Reign’s control solutions to your automated monitoring provides the ability to automatically shut off pumps or other equipment at your remote locations, from your PC, tablet, or phone.
Call or send in a request for a demonstration of the powerful automation available to you at a price you can afford.
Reign’s remote tank monitoring system offers 24/7 access to the levels in all your tanks. The Reign tank monitoring solution eliminates the need to use expensive resources to physically check the tank levels, saving time and money for expensive truck rolls. Automated tank monitoring provides critical data for making better decisions about when to fill and empty the tanks and notifies you of critical tank levels to help eliminate spills or equipment outages. In addition to tank levels, you also benefit from monitoring your production numbers and when power outages occur at the site.
Adding Reign’s control solutions to your automated tank monitoring, you receive the ability to automatically shut off pumps or other equipment associated with your tanks.
With Reign’s remote equipment monitoring in place, operators can better predict and support equipment performance. Our system provides the ability to take prompt actions when necessary to prevent unplanned downtime or spills.
Reign’s Pump Monitoring and Control Systems report current pump run status, local power conditions, and remote pump start and stop. In addition, our pump monitor and control systems can be paired with other Reign solutions, such as tank monitors, to automatically shut off pumps and help prevent expensive and damaging spills. If the tank monitoring system detects a high level, the system will shut off the pump(s) associated with the tank. When the tank reaches a low level, the system will automatically restart the pump(s).
Our systems will immediately send text and email notifications to your team if power loss occurs, substantially reducing downtime and significantly increasing production. Check out our savings calculator below to see how much more your lease can produce from power loss alerts alone.
Reign Flow and Pressure Monitoring systems are among the easiest to deploy and most economical on the market. Our approach is available in both A/C and Battery powered versions. Any flow monitor with a 4-20 mA output can be connected and reported to the cloud in minutes. Our pressure monitors can be deployed in minutes anywhere a ¼” port is available. Both solutions allow you to get insight into your operations for a fraction of the cost of traditional solutions, allowing you to make the best operating decisions in real-time.
With the addition of a simple pressure sensor, our Pump Monitor and Control systems become powerful Pump Off Controller and time clock. By monitoring the pressure of the lead line, we can observe the current condition of the formation. Instead of running a basic time clock, now you can make sure you are running your pumps when there is product available to be drawn and automatically shut off the pump until the formation has time to recover. This results in energy savings, a significant reduction in equipment wear and tear, and staggering production increases. Some Reign customers have reported a 3x increase in production from the same well with no additional equipment
With the addition of a simple pressure sensor, our Pump Monitor and Control systems become powerful Pump Off Controller and time clock. By monitoring the pressure of the lead line, we can observe the current condition of the formation. Instead of running a basic time clock, now you can make sure you are running your pumps when there is product available to be drawn and automatically shut off the pump until the formation has time to recover. This results in energy savings, a significant reduction in equipment wear and tear, and staggering production increases. Some Reign customers have reported a 3x increase in production from the same well with no additional equipment
With the addition of a simple pressure sensor, our Pump Monitor and Control systems become powerful Pump Off Controller and time clock. By monitoring the pressure of the lead line, we can observe the current condition of the formation. Instead of running a basic time clock, now you can make sure you are running your pumps when there is product available to be drawn and automatically shut off the pump until the formation has time to recover. This results in energy savings, a significant reduction in equipment wear and tear, and staggering production increases. Some Reign customers have reported a 3x increase in production from the same well with no additional equipment
Power loss, equipment failures, natural disasters (such as flooding and lighting strikes), and human error can all result in costly downtime and loss of production. Reign RMC provides real time visibility to all of your assets, automatic alerts when something is wrong, and the ability to start and stop pumps remotely or automatically. All of this means your downtime is virtually eliminated, and your assets are producing at maximum output and profitability. Enter your production volumes and average barrel sell price below to see how much money monitoring and control from Reign RMC could be saving you!
| Barrels Produced Per Year: | Average Price Per Barrel: |
