How it works?
Because Reign RMC logic and software are in the cloud, not in our physical devices, Reign RMC is both less delicate and less expensive to initially install or replace in the event of damage or loss than Traditional systems.
Customizable dashboards pull data together in seconds into one convenient location for easy analysis and action.
Reign’s remote level monitoring systems offer 24-hour, real-time access to the levels in your water towers, wet wells, tanks, and ponds. That eliminates the need to conduct physical and provides valuable data for making better decisions about when to fill and empty.
Reign solutions can also easily link tank level monitoring to controlling pumps and valves to save time and money with the ability to automatically turn pumps on and off when your tanks or ponds reach pre-defined levels
Complete control and automation is possible for much less than you might expect.
Reign Tank Monitoring allows you to:
Get real time tank levels from any location
Receive level alerts via text or email based on preset criteria
Turn assets on and off based on tank levels
Eliminate need for physical level checks
Montitor electric motor amperage or power loss
Receive reports on levels and level changes automatically emailed to you on a daily, weekly, or monthly basis
With Reign RMC’s Pump control and monitoring system, you can securely monitor and control your pumps from anywhere in the world
Suitable for a wide range of applications including water transfer pumps, potable and wastewater pump stations, lift stations, treatment plants, and anywhere else you want to remotely monitor and control a pump, Reign solutions are so simple that they can be customer installed or set up by Reign RMC.
All data is logged and available via your portal for quick and easy to pull and read reporting.
Because Reign RMC logic and software are in the cloud, not in our physical devices, Reign solutions are both less delicate and less expensive to replace in the event of damage or loss than traditional systems.
Remote Automated Shuttoff for pumps
When spills can’t happen, Reign systems are the solution. Reign Pump control can be paired with other Reign Solutions to automatically shut off pumps or other equipment when predefined conditions are met.
When our tank monitoring system detects a preset high level, for instance, Reign systems shut off the pump(s) associated with the tank. When the tank reaches a preset low level, Reign solutions automatically restart the pump(s).
In the event of a high-high level, an immediate SMS notification is sent. If communication is lost for a predefined period of time, Spill Kill shuts off the pump(s) it controls, avoiding costly and dangerous environmental impact events.
Spill Kill is ideally suited to tanks and lift stations, but also adaptable to a wide variety of other applications.
Reign Pump Monitoring and Control allows you to:
Start and stop engines remotely
Increase and decrease RPM remotely
Monitor fuel level and fuel pressure
Monitor engine temperature
Monitor suction and discharge pressures
Receive email and/or text alerts based on user-defined criteria such as low fuel, high temp, etc
Flow and Pressure Monitoring
If you want easy-to-read flow meter information delivered to your inbox in hourly, daily, weekly, or monthly reports, or available anytime via our easy to navigate dashboard, Reign has your solutions.
Reigns flow monitoring is less complicated to use than traditional SCADA systems, a fraction of the price, and quick and easy to install. In fact, most solutions are simple enough for customer installation.
In addition, Reign can provide line pressure monitoring, giving you valuable insight to blockages, backups, and line breaks.
In addition to solar power, Reign systems can tap into local power sources, or operate on battery alone, giving you ultimate flexibility and the ability to monitor remote assets that used to be impossible or cost prohibitive to monitor in the past.
Reign Flow and Pressure Monitoring allows you to:
Monitor real time flow and pressure rates
Gain valuable insight to blockages, backups, and line breaks
Reduce energy use and equipment wear and tear.
Receive reports on rates automatically emailed to you on a daily, weekly, or monthly basis.
Air Release Valve Monitoring
Understaffed municipalities don’t need to be burdened with field checking air release valves or rely on the public to report warning lights or visably leaking valves. But failure to service valves that need attention can lead to increased pump run times and a host of other problems from minor to very dangerous.
Reign RMC has developed a cost-effective monitoring kit for installation on popular H-Tec Air Valves that will alert instantly you if the valve exhibits behavior indicative of a problem. The basic Digital Service Indicator kit can be installed in minutes and sends a simple text message if a problem is encountered.
Take it a step further by adding the capability to remotely close a shut off valve to prevent any potential for leaking.
In addition, Reign is the only system that also actively monitors the pressure inside of your Air Release Valves. This gives you valuable insight to your systems operation at critical locations. This information can alert you to potential line blockages, failing check valves, and blocked or failing Air Valves.
Battery, solar or local power options make this available for every valve in your system.
Reign Air Release Valve Monitoring allows you to:
Receive instant alerts of valve failure and vent tube leaks.
Monitor real time Valve Body pressures.
Pull trend reports on pressure over time.
Receive instant alerts via text or email if assets fall outside of preset criteria.
Receive reports on pressures and power status automatically emailed to you on a daily, weekly, or monthly basis .
Flood Plain and Watershed Monitoring and Control
Reign RMC offers many different solutions to help you monitor, manage, and predict how waterways and watersheds that feed your municipality will impact your own systems and infrastructure. In addition, we can add automated control of different pumps, gate valves, or assets based on when certain levels or conditions are met.
River and Stream Level and Flow
During seasonal flooding, or unexpected weather events, understanding what waterways are doing upstream can provide invaluable forewarning of coming conditions for your own systems. With Reigns cellular and battery powered solutions, it has never been easier or more affordable to add measurement points along critical waterways and flood plains. We can easily help you monitor and measure water levels, and flow rates and can send automatic alerts via text or email when certain preset conditions are met. In addition, we have an easy to use and understand dashboard that stores all of this information, making it easy to see trends and pull reporting in seconds
Retention pond level management and pump control
With Reign solutions, measuring the levels of lakes and ponds is a piece of cake. In addition, we can easily add pump monitoring and control based on data that is received. In addition, we can also control many types of gate valves, allowing you to take critical measures and actions in seconds, from any phone, tablet, or computer, anywhere in the world.
Weather station monitoring
Reigns portable solutions make it a breeze to set up weather stations to track temperature, rain fall rates, and more. Our cellular solutions make it easy to get that information up to the cloud instantaneously, and alerts can be set based on criteria that you can set up in seconds. In addition, because we have battery and solar options, we can deploy these solutions virtually anywhere in your system.
Reign Flood Plain and Watershed Monitoring and Control allows you to:
Monitor river and stream levels and flow rates.
Monitor retention pond levels and automatically control pumps and valves.
Monitor remote weather stations providing critical environmental data in real time.
Deploy assets to remote locations with easy-to-install, battery powered, fully wireless monitors.