Radar Sensors

Applications

  • Level measurement tanks
  • Wells
  • Rivers and lakes 
  • Oil & Gas Solutions
  • Municipal Water Solutions – water treatment
  • Pumping Stations
  • Rain Overflow Basins
  • Bulk Solids – Used in Small Bulk Solids Silos or Open Containers 

SEN-VPLUS-C11 is an ideal sensor for non-contact level measurement in straightforward applications that require a high level of protection. It operates by emitting a continuous radar signal through its antenna. This signal is reflected by the medium and received back as an echo.

The difference in frequency between the emitted and received signals is directly proportional to the distance, which correlates with the filling height. This measured height is then converted into a corresponding output signal, representing the final measurement value.

SEN-VPLUS-C11 : Radar Sensor 4-20 mA output, 24 VDC supply, measuring range up to 10 m, accuracy ± 5 mm, PVC 10 meter cable

Specifications

  • Measuring range up to 10 m (32.81 ft)
  • Deviation ≤ 5 mm
  • Beam angle 8°
  • Measuring frequency W-band (80 GHz technology)
  • Output signal 4 … 20 mA
  • Process fitting Thread G1½, 1½ NPT, R1½
  • Mounting connection Thread G1, 1 NPT, R1
  • Process temperature -40 … +60 °C (-40 … +140 °F)
  • Ambient temperature -40 … +60 °C (-40 … +140 °F)
  • Bluetooth standard Bluetooth 5.0
  • Bluetooth range typically 25 m (82 ft)
  • Protection rating IP66/IP68 (3 bar, 24 h) acc. to IEC 60529,
  • Type 4X/6P acc. to UL 50
 
( Note this directs you to a third-party website)